Відео

I was searching for how to replace the bearings on my Banshee Spitfire and just happened to stumble upon this video with your own Spitty! I’m still gonna give it a go myself! 😂

No lbs for me anymore after some lbs mech ruined my headset putting some forks on. Had them in upside down.

My 2006 Marzocchi DirtJam manual says 180cc in RIGHT leg....is that true?

Vicky old with character 😂and sticky in parts 😂

Bike shops charge more for doing the work than the cost of the tools itself, or about the same cost. If you change bearings once a year, learning how to do this yourself will save yourself a fortune in the long run.

I'm up in Aviemore and still ride one of these :-) Great bike. Had it for years.

Fox R Shock, coil spring pace forks... ridden to death and caked in road dirt. Ruined rear mech, ruined BB, so I picked it up and took it away.

Got one of these with a bit of play in the rear swingarm. Found it in the street, abandoned.

good advise I think. It looks like one of the hardest home machanic jobs. I would love to take my bikes to the LBS but unfortunately there isn't a bike shop around my way that I could trust and anyway I need to learn how to change frame bearings due to having 4 full suss bike in the family😬

So did you push the hose all the way in? Another one without explanation of this

Hey. Can i use an offset bushing in reverse to raise my BB height and steepen my head angle slightly?

5 years later this light is still brilliant. They now sell them with a remote included

dude, man you're awesome! I did this and it worked like a charm, thank you!

Yeh it would be nice if you could trust your LBS. But at the end of the day they charge the same amount of money as qualified car mechanics without actually having s qualification. Where I live this can be 100 dollars an hour. In my experience they often are not as accountable as actual qualified mechanics\tradesmen. If you're going to be into bikes for a long time you're better off buying the right tools and learning to do it yourself. Most of the tools are cheap compared to paying your LBS the hourly rate they charge.

No specialist tools, except for the specialist tool.

Muy buen vídeo. Espero que me sirva para mi Marzocchi Bomber MX comp eta

Looks like you put it back the wrong way round?

Fortunately I have my own lathe and have made my own tools to replace bearings on my Trek rail 😊

I was expecting to hear some actual reason why you shouldn't EVER change your bearings. This is just you looking out for us getting frustrated with a quirky DIY service job? Strange. I also don't understand your cost argument. You suggest paying the shop to change bearing twice a year as being cheaper than getting the tools to do it yourself? Are you only riding one season and then giving up on riding after that? SMH

This is exactly what I needed for my Specialized FSR stump jumper 2018. Thank you 😊👍🏽

Must have some skinny fingers getting them seals in

I have the same fork as you and I am trying to service it but I can’t find any manuals on it for oil there’s like nothing on the Internet and I’ve been looking for a long time, so if by any means, can you help me

Trek Marlin 4 has the Rear hub Formula DC31, it will be good if there is a 8 speed 11-42T freewheel available for 1X8 conversion, I cannot find any 8 speed 11-42T freewheel to suit the Rear hub Formula DC31

Thanks for the video! I just got a similar dropper on ebay for 1$. The guy says it wasn't working and after I tore it apart it looks like it is missing the smaller rod that slides inside the shaft of the cylinder that actuates it. (starting at 2:26 is a good shot of what I'm talking about. the smaller shaft sticking out to the left of the threads) Any chance you know what diameter that little rod is? I want to just make one and I'm hoping that fixes the problem. Thank you!!!!

Buy specific bearing puller and fitting tools for your bike. You can often find them for under $50. My bike shop would probably charge upward of $250 for a pivot over haul. I’d rather do it myself on a Sunday. If you aren’t good with tools or dislike faffing, support you local bike shop

Hi, which size of the snap ring pliers have you used to remove rings in the upper stantions below damper? Its so many sizes!

muy bueno

Once or twice a year change out bearings😂 . Alot of bike manufacturers don't even reccomend that. Also, pulling bearings is a critical skill for all forms of wrenching: automotive, small engines, utilities, etc...its a good skill to learn. I will say, proper puller tools really does change the game; but you don't have to spend 500$ with park took. Any ol 2 jaw or collet style puller set from harbor freight will work just fine for <50$

Awfull mindset! If you dont try to learn you will never learn…

New XTR M9100 haven’t the banjo, fuck 😅

My olive is not going in

ya. I think I agree 100%. but I also @mikeandrews7551 has a point. jr techs just struggle maybe as much as me. 🤔

Stop w the music

It went together easily in less than an hour. ua-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.

I use a generic c-clamp and a short socket to press my bearings in.

I've had a b-17 frame with a fox vanilla shock in my shed for the past 13 years, finally got some decent parts (new and new stored as long as the frame 😅) together for a retro 1x11.

pop them out with a hammer, or press them out with a nut, bolt, and washers. press in the new bearings using the old bearing and a nut/bolt. total cost $0.00 and an hour of your time. LBS-$100+ and a week or 2 wait... ill agree that if you dont have the most basic tools you should just take it to your lbs, because there is a slim chance you know how to use them. but for the other 90% of people....getting bearings swapped 2 times a year like you said would be ridiculously expensive. get creative, you can use random junk laying around as a die to press them in/out if needed. i didnt even know bearing cup sets for bikes existed until recently, never needed them..

Great to see an old Marin I have an original Marin B17 ride it every day upgraded nearly everything fantastic bike love it never getting rid 😊 her name is minty Margo

i am 5'4" I ride a 27.5 as well as a 29er. No question about it the 27.5 fits me better. BUT at the same time when getting a trail or path ridden in a shorter period of time no question about it the 29er is way quicker. Handling is better on the smaller bike. I Riden a 27.5 medium frame and a small frame for the 29er

SRAM xd hub is so much better than microspline

im 12 and i run a 29er

I pimped up a 3 x 9 to a 1x. 38t front and box 11- 50 cassette. Went from a 27.5r mtb to a 29r street flyer.

Hello, i need help, How did you get the pistons out of the part that doesn't have caps?

Finally a solution to mullet a bike without a flip chip

was replacing 4 bearings in my upper link and I cracked it, and they don't ship that part to my country so I'm sorta stuck deciding weather to just get a whole new frame and transfer the parts or try to get the part directly from the manufacturer somehow :(

DIY??? What a joker! Who the hell has a laser cutter down in their garage/basement?

I just use finger because am stronk

I would if i could! All the bike shops round here are too busy, they have a 5+ week lead time for changing frame bearings at the moment ¯\_(ツ)_/¯ It's a 2 or 3 week lead time just to get it in the shop. That includes the shops i don't trust much, which you're usually better off doing it yourself anyway because they do get things wrong.

Hey man how come you're no posting anymore?